Table of Contents
Advertisement
When Problems Such As Dot Drop-out are Not Cleared Up
When Problems Such As Dot Drop-out are Not Cleared Up
When flaws in the dot pattern such as dot drop-out are not cleared up even after performing cleaning using the
cleaning function (normal, medium, or powerful) or manual cleaning, perform the operation described below.
A large amount of ink will be discharged during this operation. Perform this operation only when dot
drop-out cannot be cleared up even after performing cleaning using the cleaning function (normal,
medium, or powerful) or manual cleaning.
P. 76, "Maintenance that Should Be Performed Daily"
P. 80, "When Normal Cleaning Is Not Effective"
P. 82, "Maintenance that Should Be Performed More Than Once a Month"
Procedure
Discard the discharged fluid in the drain bottle.
By referring to
P. 76, "Disposing of Discharged Ink"
CAUTION
Press
.
MENU
SUB MENU
SUB MENU
INK CONTROL
INK CONTROL
INK RENEWAL
EMPTY
DRAIN BOTTLE
RENEWING INK. . .
> > > > >
INK CONTROL
INK RENEWAL
Press
, dispose of the discharged fluid. Start from step
Be sure to discard the discharged ink at this step.
A large amount of ink will be discharged during this operation. Be sure to dis-
card the discharged ink at this step. If you do not discard the discharged ink at
this step, the discharged ink might overflows from the drain bottle during the
subsequent process..
Press
the left appears.
Press
Press
Press
Press
Check that the drain bottle is empty and press
The screen shown in the figure appears.
When it finishes, the screen shown in the figure appears again.
in this order to go back to the original screen.
several times until the screen shown on
.
twice.
, and then
.
.
3
.
.
87
Advertisement
Table of Contents
