Transmitting A Group Call - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

9.6.2 Transmitting a Group Call

Group Call from Group Call Directory
1. Press the
appear.
2. P r e s s t h e
" GROUP ". (To cancel, press the
or soft key.)
3. Press the
ceiver will beep, and the " GROUP " menu
will appear. The previous four group
contacts will be listed.
4. Press the
group you want to contact.
Press the
group other than those on the display.
5. Press the
the /
ing channel you want to communicate
on and press the
6. Press the
the group call signal.
7. After the group call is transmitted, all
the radios in the group will switch to
the channel which is selected on step 5
above.
8. Press the
radio operation mode.
9. Listen to the channel to make sure it
is not busy, then key the microphone
and call the other vessels you desire to
communicate with.
GX1200E
key. The " DSC MENU " will
/ k e y s t o s e l e c t
soft key. The trans-
/ keys to select a
soft key to select a
soft key, then press
keys to select the operat-
soft key.
soft key to transmit
soft key to return to
-DSC MENU-
INDIVIDUAL
GROUP
ALL SHIPS
-DSC MENU-
INDIVIDUAL
key
GROUP
ALL SHIPS
-GROUP-
YAESU
STANDARD
023456789
MANUAL
YAESU
STANDARD
-SELECT CH-
06
08
09
YAESU
ROUTINE
TRANSMIT?
-GROUP-
YAESU
ROUTINE
CH:06
TRANSMITTING
-GROUP-
YAESU
ROUTINE
CH: 06 0:01
-GROUP-
-GROUP-
Page 51