Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual page 57

6. Press the
the position request DSC call.
7. W h e n t h e G X 1 2 0 0 E r e c e i v e s t h e
position from the polled vessel, the
GX1200E will produce a ringing alarm
sound and the position from the polled
vessel is sent to a GPS chart plotter via
NMEA 0183. (DSC BEEP needs to be
enabled to hear alarm.)
8. Press any key to stop the alarm.
9. Press the
from the polled vessel transferred on the
display.
10. Press the
position data again as the " OTHER LOG "
menu. Press the
to return to radio operation mode.
11. If the GX1200E does not receive a reply,
the display will be as shown in the illus-
tration on the right. To send again, press
the soft key.
RESEND
12. To exit this menu and return to radio operation mode press the
or the
If the GX1200E does not receive position data from the polled vessel,
the LCD will show "NO POSITION DATA."
GX1200E
soft key to transmit
key to show the position
soft key to show the
soft key again
soft key.
-POS REQUEST-
YAESU
TRANSMIT?
-OTHER LOG-
POS REPLY
YAESU
-POS REQUEST-
YAESU
WAIT FOR ACK
SINCE
RESEND
NOTE
RX POS REPLY
YAESU
ACKNOWLEDGED
SINCE 0:01
RX POS REPLY
-POS INFO-
33˚35.41N
118˚07.45W
ACKNOWLEDGE
0:01
key
Page 57