Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual page 50

4. Press the
with the
5. Press the
6. Press the
the first letter of the group name you want
to reference in the directory.
7. Press the
letter in the name and step to the next letter
to the right.
8. Repeat step 6 and 7 until the name is
complete. The name can consist of up to
eleven characters, if you do not use all
eleven characters press the
key to move to the next space. This method
can also be used to enter a blank space in
the name. To clear the previous letter, press
the soft key.
9. After the eleventh letter or space has been
entered, press and hold the
to advance to the MMSI number (Maritime
Mobile Service Identity Number) entry.
10. Press the
desired number and move one space to the right press the
key. Repeat this procedure until all nine space of the MMSI number are
entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the
press the
12. To store the data entered, press and hold
the soft key.
13. To enter another individual address, repeat
steps 4 through 12.
14. To exit this menu and return to radio opera-
tion mode press the
soft key three times.
Page 50
soft key, then select " ADD "
/ keys.
soft key.
/ keys to scroll through
soft key to store the first
/ keys to scroll through numbers, 0 to 9. To enter the
soft key until the wrong character is selected, then
/ key to enter the correct letter or number.
key or press the
-DSC SETUP-
INDIVI ACK
INDIVI RING
GROUP DIR
ADD
EDIT
DELETE
GROUP NAME
S
ID:0--------
soft
GROUP NAME
STANDARD
ID:0--------
soft key
GROUP NAME
STANDARD
ID:012345678
-GROUP DIR-
-GROUP DIR-
-GROUP DIR-
-GROUP DIR-
GX1200E
soft