Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual page 62

6. Press the
position to the selected vessel.
7. Press the
display to the radio operation mode
display.
Position Report - Manual MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the
appear in the display.
2. Press the
REPORT ".
3. Press
report directory. The previous four position
report contacts will be listed.
Press the
4. Press the
then press the
5. Enter the MMSI number (nine digits) which
you want to contact.
Press the
numbers, 0 to 9. To enter the desired number
and move one space to the right, press the
soft key. Repeat this procedure until all
nine spaces of the MMSI number which you
want to contact are entered.
6. If a mistake was made entering in the MMSI
number repeat pressing the
until the wrong number is selected, then move
the channel knob to correct the entry.
7. When finished entering the MMSI number,
press and hold the
Page 62
soft key to send your
soft key to return the
key. The " D S C M E N U " will
keys to select the " POS
/
soft key to show the position
soft key.
keys to select " MANUAL ",
/
soft key.
/ keys to scroll through
soft key.
-POS REPORT-
YAESU
TRANSMIT?
-POS REPORT-
YAESU
TRANSMITTED
SINCE
-DSC MENU-
ALL SHIPS
POS REQUEST
POS REPORT
-POS REPORT-
MANUAL
YAESU
STANDARD
-POS REPORT-
INPUT MMSI
ID:---------
-POS REPORT-
INPUT MMSI
ID:234567891
soft key
0:01
GX1200E