Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual page 58

Position Request - Manual MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the
appear in the display.
2. Press the
REQUEST ".
3. Press
request directory. The previous four position
request contacts will be listed.
Press the
4. Press the
then press the
5. Press the
numbers, 0 to 9. To enter the desired number
and move one space to the right press the
soft key. Repeat this procedure until all
nine space of the MMSI number which you
want to contact are entered.
6. If a mistake was made entering in the MMSI
number repeat pressing the
until the wrong number is selected, then press
the /
7. When finished entering the MMSI number,
press and hold the
8. Press the
(" ROUTINE " or " SAFETY ") for the position
request call, then press the
9. Press the
position request DSC call.
10. When the GX1200E receives the position from
the polled vessel, the GX1200E will produce a
ringing alarm sound and the position from the
polled vessel is sent to a GPS chart plotter via
NMEA 0183. (DSC BEEP needs to be enabled
to hear alarm.)
Page 58
key. The " D S C M E N U " will
keys to select " P O S
/
soft key to show the position
soft key.
keys to select the " MANUAL ",
/
soft key.
/ keys to scroll through
keys to correct the entry.
soft key.
/ keys to select the category
soft key to transmit the
INDIVIDUAL
GROUP
ALL SHIPS
GROUP
ALL SHIPS
POS REQUEST
-POS REQUEST-
MANUAL
YAESU
STANDARD
-POS REQUEST-
INPUT MMSI
ID:---------
-POS REQUEST-
soft key
INPUT MMSI
ID:234567891
ROUTINE
SAFETY
-POS REQUEST-
soft key.
234567891
TRANSMIT?
RX POS REPLY
234567891
ACKNOWLEDGED
SINCE
-DSC MENU-
-DSC MENU-
-CATEGORY-
0:01
GX1200E