No Action During Menu Operation; No Action During Dsc Operation - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

10.3.9 No Action during Menu Operation

If a key is not pressed during the setup menu or the DSC menu mode, the
GX1200E will automatically return to radio operation.
This menu selection allows the automatic switching time to be changed. The
default selection is 10 minutes.
1. Press and hold the
MENU " appears.
2. Press the
menu.
3. Press the
ACT-MENU " with the
4. Press the
key to the desired time and press the
soft key.
5. To exit this menu and return to radio operation
mode press the
soft key twice.

10.3.10 No Action during DSC Operation

If a key is not pressed during the DSC operation, the GX1200E will automati-
cally return to radio operation.
This menu selection allows the automatic switching time to be changed. The
default selection is 15 minutes.
1. Press and hold the
MENU " appears.
2. Press the
menu.
3. Press the
ACT-DSC " with the
4. Press the
key to the desired time and press the
soft key.
5. To exit this menu and return to radio operation
mode press the
soft key twice.
GX1200E
key until " S E T U P
key to select " DSC SETUP "
/
soft key, then select " N O
/ key.
soft key, then press the
key or press the
key until " S E T U P
key to select " DSC SETUP "
/
soft key, then select " N O
/ key.
soft key, then press the
key or press the
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
-DSC SETUP-
DSC BEEP
AUTO CH SW
NO ACT-MENU
/
-NO ACT-MENU-
4 MIN
5 MIN
10 MIN
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
-DSC SETUP-
AUTO CH SW
NO ACT-MENU
NO ACT-DSC
/
-NO ACT-DSC-
5 MIN
10 MIN
15 MIN
Page 85