Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual page 45

Individual Call - Manual MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the
appear.
2. Press the
UAL ", and then press the
cancel, press the
3. The transceiver will beep, and the " INDIVID-
U A L " menu will appear. The previous four
individual contacts will be listed.
Press the
4. Press the
then press the
5. Press the
numbers, 0 to 9. To enter the desired number
and move one space to the right, press the
soft key. Repeat this procedure until all
nine spaces of the MMSI number which you
want to contact are entered.
6. If a mistake was made entering in the MMSI
number repeat pressing the
until the wrong number is selected, then move
the channel knob to correct the entry.
7. When finished entering the MMSI number,
press and hold the
8. Press the
ing channel you want to communicate on and
press the
9. Press the
the individual DSC signal.
10. After the individual call is transmitted, if a
reply signal is not received, " WAIT FOR ACK "
is shown on the display which means the
GX1200E is waiting for the ship you called to
send an acknowledgment.
11. To transmit the call again, press the
GX1200E
key. The " D S C M E N U " will
keys to select " INDIVID-
/
or
soft key.
keys to select " MANUAL ",
/
soft key.
/ keys to scroll through
soft key.
/ keys to select the operat-
soft key.
soft key again to transmit
soft key. (To
soft key.)
soft key
soft key.
RESEND
-DSC MENU-
INDIVIDUAL
GROUP
ALL SHIPS
-INDIVIDUAL-
MANUAL
YAESU
STANDARD
-INDIVIDUAL-
INPUT MMSI
ID:---------
-INDIVIDUAL-
INPUT MMSI
ID:234567891
-SELECT CH-
06
08
09
-INDIVIDUAL-
234567891
ROUTINE
TRANSMIT?
-INDIVIDUAL-
234567891
ROUTINE
CH:06
TRANSMITTING
-INDIVIDUAL-
234567891
WAIT FOR ACK
SINCE 0:01
RESEND
Page 45