Simplex/Duplex Channel Use; International, Usa, And Canada Mode - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

When a transmission was shut down by the TOT, the GX1200E can
not transmit afterwards for 10 seconds.

8.4 SIMPLEX/DUPLEX CHANNEL USE

Refer to the VHF MARINE CHANNEL CHART (page 92) for instructions on
use of simplex and duplex channels.
All channels are factory-programmed in accordance with International,
Industry Canada (Canada), and FCC (USA) regulations. Mode of op-
eration cannot be altered from simplex to duplex or vice-versa.

8.5 INTERNATIONAL, USA, AND CANADA MODE

To change the channel group from International to USA or Canada:
1. Press and hold the
2. Press the
3. Press the
GROUP ".
4. Press the
5. Press the
" CAN ".
6. Press the
7. Press the
and return to radio operation mode.
USa M
Refer to the VHF MARINE CHANNEL CHART (page 92) for allocated
channels in each mode.
GX1200E
key until " SETUP MENU " appears.
key to select " CH FUNC SETUP ".
/
soft key, then press the
soft key.
key to select desired channel group " USA ", " INT ", or
/
soft key to store the selected setting.
key or press the
i
ode nTernaTional
NOTE
NOTE
soft key twice to exit the menu
M
ode
key to select " CH
/
c M
anada ode
Page 25