Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual page 52

Group Call - Manual Group MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the Group Call Directory.
1. Press the
appear.
2. P r e s s t h e
" GROUP ". (To cancel, press the
or soft key.)
3. Press the
ceiver will beep, and the " GROUP " menu
will appear. The previous four group
contacts will be listed.
Press the
4. P r e s s t h e
" MANUAL ", then press the
key.
5. P r e s s t h e
through numbers, 0 to 9. To enter the
desired number and move one space to
the right press the
Repeat this procedure until all nine
space of the MMSI number which you
want to contact are entered.
6. If a mistake was made entering in the
MMSI number, repeat pressing the
soft key until the wrong number
is selected, then press the
keys to correct the entry.
7. When finish the entering the MMSI number, press and hold the
soft key.
8. Press the
operating channel you want to communicate on and press the
soft key.
9. Press the
10. After the group call is transmitted, all
the radios in the group will switch to
the channel which is selected on step 5
above.
Page 52
key. The " DSC MENU " will
/ k e y s t o s e l e c t
soft key. The trans-
soft key.
/ k e y s t o s e l e c t
/ k e y s t o s c r o l l
soft key.
soft key, then press the
soft key to transmit the group call signal.
-DSC MENU-
INDIVIDUAL
GROUP
ALL SHIPS
INDIVIDUAL
key
GROUP
ALL SHIPS
-GROUP-
MANUAL
YAESU
STANDARD
INPUT MMSI
ID:0--------
soft
INPUT MMSI
ID:023456789
06
08
09
023456789
ROUTINE
TRANSMIT?
/
/
ROUTINE
CH:06
TRANSMITTING
-DSC MENU-
-GROUP-
-GROUP-
-SELECT CH-
-GROUP-
keys to select the
-GROUP-
023456789
GX1200E