Microphone - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

7.3 Microphone

Q3 PTT (Push-To-Talk) Switch
Keys the transmitter when the
transceiver is in radio mode.
/ Keys
Q4
The and
microphone function the same as
the and
panel of the transceiver.
Q5 MIC (Microphone) Hole
Transmits the voice message with
reduction of background noise,
using Clear Voice Noise Reduction
Technology.
Be sure your mouth is about 1.3 cm from the MIC hole for best
performance.
Key
Q6
The key on the microphone functions the same as the
the front panel of the transceiver.
Immediately recalls channel 16 from any channel location. Pressing and
holding this key recalls channel 9. Pressing the
the previously selected working channel.
Key
Q7
Press this key to toggle the transmit output power between 25 W (High)
and 1 W (Low) power. When the
er is on channel 13 or 67, the power will temporarily switch from LO to HI
power until the PTT is released.
The key does not function on transmit inhibited and low power only
channels.
1W low power is indicated by LO on the display. When 25W high
power is selected the display do not show an indication.
GX1200E
keys on the
keys on the front
Q3
Q4
NOTE
key is pressed while the transceiv-
NOTE
key on
key again reverts to
Page 23
Q5
Q6
Q7