Scan Memory Programming; Memory Scanning ( M-Scan ) - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

8.6.2 Scan Memory Programming

1. Press and hold the
MENU " appears.
2. Press the
SETUP ".
3. Press the
key to select " SCAN MEMORY ".
/
4. Press the
5. Press the
channel to be scanned, then press the
soft key. The "MEM" icon appears on the
display, which indicates the channel has been
selected to the scan channel.
6. Repeat step 5 for all the desired channels to
be scanned.
7. To delete a channel from the list, select the channel then press the
soft key. The "MEM" icon disappears from the display.
8. Press the
menu and return to radio operation mode.

8.6.3 Memory Scanning ( M-SCAN )

1. Adjust the SQL knob until background noise disappears.
2. To start scanning, press one of the soft keys,
then press the
necessary to press the
locate the
appears on the LCD. Scanning will proceed
from the lowest to the highest programmed
channel number and will stop on a channel
when a transmission is received.
3. The channel number will blink during recep-
tion.
4. To stop scanning, press the
one of the soft keys, then press the
soft key.
GX1200E
key until " S E T U P
key to select " CH FUNC
/
soft key, then press the
soft key.
/ key to select a desired
key or press the
soft key (it may be
soft key). "
-CH FUNC SETUP-
soft key three times to exit the
soft key to
M - S C A N
"
key or press
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
CH GROUP
SCAN MEMORY
SCAN TYPE
-SCAN MEMORY-
16 MEM
15
14
Page 27