Setting Up The Individual Call Ringer - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

5. Press the
requested channel. (To inform that you cannot
respond, press the
6. Press the
edgement.
Press the
channel for communication from the requested
one.
7. Monitor the channel to make sure it is clear,
then press the PTT on the microphone and
talk to the calling vessel.
8. Press the
9. Press the

9.5.6 Setting up the Individual Call Ringer

When an individual call is received the radio will produce a ringing tone for 3
minutes (by default). This selection allows the individual call ringer time to be
changed.
1. Press and hold the
MENU " appears.
2. Press the
SETUP " menu.
3. Press the
" INDIVI RING " with the
4. Press the
5. P r e s s t h e
ringing time of an individual call.
6. Press the
selected setting.
7. To exit this menu and return to radio
operation mode press the
press the
GX1200E
soft key to switch to the
ABLE
soft key.)
UNABLE
soft key to send an acknowl-
soft key to change the
CHG CH
soft key to return to the working channel.
key to return to radio operation.
key until " SETUP
keys to select " DSC
/
soft key, then select
soft key.
/ k e y s t o s e l e c t
soft key to store the
soft key twice.
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
/ keys.
-DSC SETUP-
INDIVI REPLY
INDIVI ACK
INDIVI RING
key or
RX INDIV
234567891
NOT REPLIED
SINCE 0:01
ABLE UNABLE
-INDIVIDUAL-
234567891
CH: 06
SEND ABLE
CHG CH
-INDIVIDUAL-
234567891
CONNECTED
SINCE 0:01
RESEND
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
-INDIVI RING-
DEFAULT(2MIN)
15 SEC
10 SEC
Page 47