Preset Channel Programming; Operation - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

8.7.1 Preset Channel Programming

1. Press the
to be programmed.
2. Press one of the soft keys, then press and
hold the
PRESET
number blinks.
3. Press the
preset channel position (" P0: " to " P9: ") you
wish to program.
4. Press the
channel into the preset channel.
5. Repeat steps 1 through 4 to program the
desired channels into the preset channels " 0 "
~ " 9 ".

8.7.2 Operation

1. Press one of the soft keys, then press the
soft key to recall the preset channel.
PRESET
The "PSET" icon will appear on the display.
2. Press the
preset channel (" 0 " to " 9 "). The preset channel
number appears (" P0 " to " P9 ") while selecting
the preset channel.
3. Press one of the soft keys, then press the
soft key again to return to the last
PRESET
selected channel. The "PSET" icon will disap-
pear from the display.
Page 30
/ key to select the channel
soft key until the channel
/ key to select the desired
soft key to program the
/ key to select the desired
GX1200E