Receiving A Position Request - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

11. Press any key to stop the alarm.
12. Press the
the polled vessel transferred on the display.
13. Press the
data again as the " OTHER LOG " menu. Press
the
operation mode.
14. If the GX1200E does not receive a reply, the
display will be as shown in the illustration on
the right. To send again, press the
key.
15. To exit this menu and return to radio operation
mode press the
key.

9.7.3 Receiving a Position Request

When a position request call is received from another vessel, a ringing alarm
will sound and " POS REQUEST " will be shown in the LCD. Operation and
transceiver function differs depending on " POS REPLY " in the " DSC SETUP "
menu setting.
Automatic reply:
1. When a position request call is received, the
GX1200E will transmit your position to the
vessel who requested it.
2. To exit from position request display, press the
soft key.
Manual reply:
1. When a position request call is received from
another vessel, the GX1200E will produce a
ringing alarm sound and the LCD will show the
MMSI (or name) of the requesting vessel.
2. Press any key to stop the alarm.
3. P r e s s t h e
position to the requesting vessel.
4. Press the
data again as the " OTHER LOG " menu.
5. To exit from position request display, press the
key or the
GX1200E
key to show the position from
soft key to show the position
soft key again to return to radio
key or the
s o f t k e y t o s e n d y o u r
REPLY
soft key to show the position
soft key.
RX POS REPLY
-POS INFO-
118˚07.45W
POS REPLY
234567891
soft
-POS REQUEST-
RESEND
WAIT FOR ACK
SINCE
soft
RESEND
-POS REPLY-
YAESU
REPLIED
SINCE
RX POS REQ
YAESU
SINCE
REPLY
-POS REPLY-
YAESU
REPLIED
SINCE
33˚35.41N
-OTHER LOG-
ACKNOWLEDGE
234567891
0:01
0:01
0:01
0:01
Page 59