Atis Setup; Atis Ch Group - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

11 ATIS SETUP

The GX1200E supports the ATIS (Automatic Transmitter Identification
System) used in Inland waterways in Europe. When enabled ATIS mode
transmits a unique ATIS code each time the Microphone's PTT switch is
released at the end of a transmission. Users should check with their local
marine regulatory authority in their country for assistance in obtaining an
ATIS code.

11.1 ATIS CH GROUP

The GX1200E has the capability to turn on and off the ATIS feature for each
channel group.
1. Press and hold the
MENU " appears.
2. Press the
SETUP ".
3. Press the
keys to select the " GROUP ".
4. Press the
5. Press the
group you wish to change the setting, then
press the
6. Press the
7. press the
setting.
8. Press the
display to the radio operation mode display.
The TX output power is set to "1W" automatically on the following
channels of the Channel Group which turned on the ATIS feature.
CH 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, and 77
GX1200E
key until " S E T U P
keys to select the " ATIS
/
soft key, then press the
soft key.
/ keys to select the channel
soft key.
keys to select " ON " or " OFF ".
/
soft key to store the selected
soft key twice to return the
/
NOTE
-SETUP MENU-
POS INPUT
MMSI SETUP
ATIS SETUP
-ATIS SETUP-
ATIS CODE
GROUP
-ATIS SETUP-
SELECT GROUP
INT
ATIS:OFF
-ATIS SETUP-
SELECT GROUP
INT
ATIS:ON
Page 87