Priority Channel - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

5. Press the
resume time, default is 2 seconds. The resume
time can be set to " 0 " through " 5 ". In the " 0 "
selection, the scanner will resume after the
other station stops transmitting (carrier drops).
6. Press the
7. To exit this menu and return to radio operation mode press the
or press the

10.2.5 Priority Channel

Allows selection of the priority channel.
1. Press and hold the
MENU " appears.
2. Select " CH FUNC SETUP " with the
keys, then press the
3. Select " PRIORITY CH " with the
keys, then press the
4. Press the
to be a priority.
5. Press the
setting.
6. To exit this menu and return to radio operation
mode press the
soft key twice.
GX1200E
/ key to select the desired
soft key to store the selected setting.
soft key twice.
key until " S E T U P
soft key.
soft key.
/ keys to select the channel
soft key to store the selected
key or press the
-SCAN RESUME-
5
4
3
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
/
DSC SETUP
-CH FUNC SETUP-
/
SCAN TYPE
SCAN RESUME
PRIORITY CH
-PRIORITY CH-
16
15
14
key
Page 81