Transmitting A Group Call - Standard Horizon QUANTUM GX6500E Owner's Manual

11. Rotate the DIAL/ENT knob to select "MMSI:", then
press the [SELECT] soft key.
12. Rotate the DIAL/ENT knob to select the second
number of the MMSI (nine digits: first digit perma-
nently set to "0") which you want to contact, then press
the [SELECT] soft key to step to the next number.
Repeat this procedure until all eight spaces of the
MMSI number are entered.
If a mistake was made entering in the MMSI number, rotate the DIAL/ENT
knob to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform step 12.
13. When finished entering the MMSI number, press the [FINISH] soft key to
confirm.
14. To store the data, select "SAVE", then press the [SELECT] soft key.
15. To enter another group address, repeat steps 5 through 14.
16. Press the CLEAR key to return to radio operation.
9.5.2

Transmitting a Group Call

Group Call using the Group Directory
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "DSC CALL", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GROUP CALL",
then press the [SELECT] soft key. (To cancel, press
the [BACK] soft key.)
4. Rotate the DIAL/ENT knob to select "HISTORY" or
"MEMORY", then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select a group you want
to contact, then press the [SELECT] soft key
GX6500E/GX6000E Page 79