Setting Up The Position Request Ringer - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

9.7.4 Setting up the Position Request Ringer

The GX1200E has the capability to turn off the position request ringer.
1. Press and hold the
MENU " appears.
2. Press the
SETUP " menu.
3. Press the
" DSC BEEP " with the
4. Press the
5. Press the
REQUEST ".
6. Press the
7. Press the
8. Press the
selected setting.
9. To exit this menu and return to radio
operation mode press the
press the
10. If you wish to return to enabling the
ringer tone, just repeat the above proce-
dure, pressing the
select " ON " in step 7 above.
Page 60
key until " SETUP
keys to select " DSC
/
soft key, then select
/
soft key.
keys to select " POS
/
soft key.
keys to select " OFF ".
/
soft key to store the
soft key twice.
/
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
keys.
-DSC SETUP-
GROUP DIR
POS REPLY
DSC BEEP
-DSC BEEP-
SELECT CALL
key or
POS REQUEST
BEEP:OFF
keys to
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
-DSC BEEP-
SELECT CALL
POS REQUEST
BEEP:ON
GX1200E