Transmitting An Individual Call - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

9.5.4 Transmitting an Individual Call

This feature allows you to contact another vessel, switch their radio to a
requested working channel and ring like a telephone. This feature is similar
to calling a vessel on CH16 and requesting to go to another channel.
Individual Call from Individual / Position Call Directory
1. Press the
appear.
2. P r e s s t h e
" INDIVIDUAL ". (To cancel, press the
or
3. Press the
er will beep, and the " INDIVIDUAL " menu
will appear. The previous four individual
contacts will be listed.
4. Press the
individual you want to contact.
Press the
individual other than those on the display.
5. Press the
/ keys to select the operating
channel you want to communicate on and
press the
6. Press the
individual DSC signal.
7. After an individual call is transmitted, if
the reply signal is not received, " WAIT
FOR ACK " is shown on the display which
means the GX1200E is waiting for the
vessel you called to send an acknowl-
edgement.
8. To transmit the call again, press the
soft key.
RESEND
9. When the GX1200E receives an acknowledgement from the vessel
you called, the radio will automatically switch to the operating channel
selected in step 5 and produce a ringing sound.
10. Key the microphone and call the other vessel you desire to communi-
cate with.
Page 44
key. The " DSC MENU " will
/ k e y s t o s e l e c t
soft key.)
soft key. The transceiv-
/ keys to select an
soft key to select an
soft key, then press the
soft key.
soft key to transmit the
-DSC MENU-
INDIVIDUAL
GROUP
ALL SHIPS
-INDIVIDUAL-
YAESU
STANDARD
234567891
-INDIVIDUAL-
MANUAL
YAESU
-SELECT CH-
STANDARD
06
08
09
-INDIVIDUAL-
YAESU
ROUTINE
TRANSMIT?
-INDIVIDUAL-
YAESU
ROUTINE
CH:06
TRANSMITTING
-INDIVIDUAL-
YAESU
WAIT FOR ACK
SINCE 0:01
RESEND
-INDIVIDUAL-
YAESU
CONNECTED
SINCE 0:01
GX1200E