8.10 PRESET CHANNELS 0 ~ 9 : INSTANT ACCESS
10 Preset Channels can be programmed for instant access. Pressing the
key activates the preset channel bank. If the
nels have been assigned, an alert beep will be emitted from the speaker.
8.10.1 Preset Channel Programming
1. Press the
programmed.
2. Press and hold the
ber is blinking.
3. Press the
set channel position ("SET 0" - "SET 9") you wish to
program.
4. Press the
the channel into the Preset channel.
5. Repeat steps 1 through 4 to program the desired
channels into Preset Channels "0" ~ "9".
8.10.2 Operation
1. Press the
The "P SET" icon will appear on the display.
2. Press the
set Channel ("0" ~ "9"). The Preset Channel num-
ber appears ("P-SET0" - "P-SET9") while selecting the
Preset Channel.
3. Press the
selected channel. The "P SET" icon will disappear
from the display.
8.10.3 Deleting a Preset Channel
1. Press the
2. Press the
nel to be deleted.
3. Press and hold the
ber is blinking.
4. Press the
channel from the Preset Channel.
5. Repeat steps 2 through 4 to delete the desired chan-
nels from Preset Channels "0" ~ "9".
6. To finish the deleting the Preset Channel, press the
Page 32
/
key to select the channel to be
key until the channel num-
/
key to select the desired Pre-
soft key momentarily to program
key to recall the Preset Channel.
/
key to select the desired Pre-
key key again to return to the last
key.
/
key to select the Preset Chan-
key until the channel num-
soft key momentarily to delete the
key is pressed and no chan-
soft key
GX1600