Ip Keyset Power; Ac/Dc Adapter For Keyset - Vodavi XTS-IP Installation Manual

IP Phones and Related Items

IP Keyset Power

The IP phone can be powered by one of two methods.
IP Keyset AC/DC Adapter (plugs into base of the unit)
Inline Power Over Ethernet (POE)
IP Keyset AC/DC Adapter
When an IP Keyset is to be powered
from local AC (not provided power over
the LAN), a separate AC/DC adapter
must be used for power. The adapter is
supplied with a ten-foot AC cord.
The adapter supports AC input power
systems with rated voltage range of
100-240 VAC @ 50/60 Hz. The adapter
provides 48 VDC at 0.1 amps. The DC
output connector is cabled to the
adapter with a ten-foot cable.
Inline Power Over Ethernet
The phone supports Ethernet power in
accordance with the 802.3af
specification.
The following illustration shows the
inline power scheme:
XTS-IP - Installation Manual
Chapter 3 - System Installation
Figure 3-48: AC/DC Adapter for Keyset
3-77
December 2005