Extension Boards - Vodavi XTS-IP Installation Manual

1-8
Chapter 1 - Introduction

Extension Boards

Several types of extension boards are capable of supporting various types of telephones as
follows:
Board Name
DTIB12
DTIB24
ETIB
SLIBC
SLIBE
Digital Telephone Interface Board
The Digital Telephone Interface Board (DTIB) provides 2-wire interfaces for telephone
connection. Two versions are available (DTIB12 and DTIB24).
The DTIB provides digital voice and data communications to/from digital telephones.
An industry-standard amphenol-type female connector is mounted on the front edge of the
PCB for connection to the station interfaces. In addition, one LED is mounted on the PCB to
indicate the in use state of the connected telephones. It will turn on when one or more ports
are busy.
»
Add-on Boards: None
Electronic Telephone Interface Board
The Electronic Telephone Interface Board (ETIB) provides 2-wire interfaces for telephone
connection.
An industry-standard amphenol-type female connector is mounted on the front of the ETIB for
connection to the station interfaces.
»
Add-on Boards: None
Single Line Telephone Interface Board
The Single Line Telephone Interface Board (SLIB) provides 2-wire interfaces for telephone
connection. Two versions are available (SLIBE and SLIBC).
An industry-standard amphenol-type female connector is mounted on the front of the SLIBE
and SLIBC for connection to the station interfaces.
»
Add-on Boards: DTRU4 and MSGU48 on SLIBE, and MSGU48 on SLIBC.
XTS-IP - Installation Manual
Table 1-1: Extension Boards
Provides 12 Digital Telephone interfaces
Provides 24 Digital Telephone interfaces
Provides 12 Analog Telephone interfaces
Provides 12 Single Line Telephone interfaces with Caller ID
Provides 12 Single Line Telephone interfaces
Function
Product Description
December 2005