Front Panel; Rear Panel - Vodavi XTS-IP Installation Manual

IP Phones and Related Items

Front Panel

The front panel of the Nomad RSGM has:
Power status LED
RCA jack for external music (audio) source -BGM-
Eight LEDs
RJ-45 Female LAN connector with yellow Speed (ON
for 100 Base-T) and green Link/Activity LEDs for WAN
connection to the router/broadband modem
RJ-45 Female LAN connector with yellow Speed (ON
for 100 Base-T) and green Link/Activity LEDs for PC
connection
RJ-45 Female LAN connector with yellow Speed (ON
for 100 Base-T) and green Link/Activity LEDs for IP
phone connection
LED indicator to display IP phone power feeding
status
Figure 3-49: Nomad RSGM Front & Rear Panels

Rear Panel

The rear panel of the Nomad RSGM has:
One RJ-11 female connector for analog CO Line
One RJ-11 female connector for analog SLT
One RJ-11 female connector for alarm/door bell input
& dry relay contact #2
One RJ-11 female connector for external BGM and dry
relay contact #1
Four-position DIP-switch for mode selections
In the case of a WAN disconnect, the IP phone can be used
to access a local CO line if the IP phone was connected in
the Local Mode. The dip switch settings enable/disable this
feature, as well as controlling alarm and relay functions.
Switch 1: CO Dial Type - Off (DTMF), On (Pulse)
Switch 2: Alarm Set - Off (not Set), On (Set)
Switch 3: Relay 1 Set - Off (not set), On (Set)
Switch 4: Relay 2 Set - Off (not set), On (Set)
One-position DIP-switch for IP phone power feeding
selection
DB-9 RS-232 connector
Reset Switch
Power jack for the AC/DC adapter supplied with the
Nomad RSGM
Ground Lug
XTS-IP - Installation Manual
3-79
Chapter 3 - System Installation
December 2005