Vodavi XTS-IP Installation Manual page 54

3-14
Chapter 3 - System Installation
Power Capacity
The power capacity of the PSU is as follows:
+5V DC
10A
Before Installation -- Ensure that the AC plug connected to Cabinet 0 is NOT plugged into
the AC outlet.
1. Place the PSU in the left-most slot in Cabinet 0, aligning the card guides with the PSU PCB
and PSU frame flanges.
2. Slide the PSU into place using the ejectors to seat the PSU fully in the Cabinet.
3. Then affix the PSU to the Cabinet with the two screws provided.
XTS-IP - Installation Manual
-5V DC +30V DC
1.5A 8.4A
Figure 3-8: PSU Installation
Power Supply Unit Installation
Battery Charging Current
1A
December 2005