Emptying The Punch Scrap Box - Konica Minolta bizhub C550 User Manual

Hide thumbs Also See for bizhub C550:

Table of Contents

Replacing toner cartridges and staple cartridges and emptying punch scrap box

Emptying the punch scrap box

If the punch scrap box of the punch kit or Z folding unit installed with the fin-

isher becomes full, the message shown below appears (if the box can be

emptied by the user).

The setting for emptying the punch scrap box should be specified by the

service representative. For details, contact the service representative.

The default setting is "Service". If a message appears, immediately con-

tact the service representative.

Screen when a Punch setting is selected