Basic copy operations
2.8.1
Selecting single-sided copies
0
As the factory default, "1-Sided > 1-Sided" is selected.
0
For details on using the original glass to scan multi-page originals, refer to
original from the original glass" on page
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [1-Sided > 1-Sided] or [2-Sided > 1-Sided].
–
If "2-Sided > 1-Sided" is selected, specify the position of the binding margin and the orientation of
the loaded original, otherwise the copies will not be printed as desired.
–
If the binding position for the original is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the original
length is 297 mm or less. If the original length is more than 297 mm, a binding margin along the short
side of the paper is selected.
–
If "Auto" is selected under "Original Bind Direction", the binding margin is set at the top or at the left.
C353/C253/C203
2-11.
2
"Scanning a multi-page
2-43