Service Information - Honda VT750C2 Shadow Spirit Service Manual

LIGHTS/METERS/SWITCHES
SERVICE INFORMATION
GENERAL
NOTICE
• Note the following when replacing the halogen headlight bulb.
- Wear clean gloves while replacing the bulb. Do not put fingerprints on the headlight bulb, as they may create hot
spots on the bulb and cause it to fail.
- If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
• Be sure to install the dust cover after replacing the bulb.
• A halogen headlight bulb becomes very hot while the headlight is on, and remains hot for a while after it is turned off.
Be sure to let it cool down before servicing.
• Check the battery condition before performing any inspection that requires proper battery voltage.
• A continuity test can be made with the switches installed on the motorcycle.
• The following color codes used are indicated throughout this section.
Bu = Blue
BI = Black
Br = Brown
G = Green
Gr = Gray
Lb = Light Blue
Lg = Light Green
0= Orange
Y=Yellow
R = Red
W=White,
SPECIFICATIONS
ITEM SPECIFICATIONS
Bulbs
Headlight
12 V -60/55 W
Brake/taillight 12V-21/5W
License light 12 V-5 W
Front turn signal/position light 12V-21/5Wx2
Rear turn signal light
12V-21 Wx2
Instrument light
LEDx6
Turn signal indicator LED
High beam indicator
LED
Neutral indicator LED
Oil pressure indicator LED
Coolant temperature indicator LED
Fuse
Main fuse
30A
Sub fuse
10 A x 5, 20 A x 1
ECTsensor
switch
Start to close (ON)
112 -118°e (234 - 244°F)
Stop to open (OFF) 108°e (226°F) minimum
Fan motor
switch
Start to close (ON) 103 -107°C (217 - 225°F)
Stop to open (OFF) 94 - 98°e (201 - 208°F)
TORQUE VALUES
ECT sensor switch
Fan motor switch
Ignition switch mounting bolt
Ignition switch cover screw
Neutral switch
Sidestand switch bolt
Horn mounting bolt
Speedometer mounting socket bolt
EOP switch terminal screw
Headlight unit mounting bolt
Brake/tail light mounting nut
VS sensor mounting bolt
7 N·m (0.7 kgf'm, 5.2 Ibf·ft)
18 N'm (1.8 kgf'm, 13 Ibf·ft)
12 N'm (1.2 kgf'm, 9 Ibf·ft)
1 N'm (0.1 kgf'm, 0.7 Ibf·ft)
12 N·m (1.2 kgf·m, 9Ibf·ft)
10 N'm (1.0 kgf'm, 7 Ibf·ft)
21 N'm (2.1 kgf·m, 15Ibf·ft)
10 N'm (1.0 kgf·m, 7 Ibf·ft)
1.9 N'm (0.2 kgf'm, 1.4 Ibf·ft)
4.1 N'm (0.4 kgf'm, 3.0 Ibf·ft)
6.3 N'm (0.6 kgf'm, 4.6 Ibf·ft)
9.8 N·m (1.0 kgf·m, 7.2 Ibf·ft)
Apply sealant to the threads
ALoe bolt; replace with a new one
21~3