FUEL SYSTEM
INTAKE MANIFOLD
REMOVAL
Drain the coolant from the cooling system
(page 7-6).
Remove the carburetor (page 6-7).
Loosen the insulator band screw and remove the
insulator from the intake manifold.
Disconnect the water hose from the rear cylinder
head.
Remove the bolts and choke cable stay.
Remove the bolts, intake manifold and a-rings.
Seal the intake ports of the cylinder heads with tape
or clean cloths to keep dirt and debris from entering
the engine.
INSTALLATION
Install new a-rings onto the intake manifold.
STAY
BOLTS
6-23