Pinion Gear Removal - Honda VT750C2 Shadow Spirit Service Manual

FII\IAL DRIVE
Select the replacement shim (page 14-8).
NOTE:
When the gear set, pinion bearing, ring gear bearing
and/or gear case has been replaced, use a 2.00 mm
(0.079 in) thickness shim for initial reference.
SHIM
\
CJ
BEARING
Press the ring gear bearing into the cover with the
marked side facing inside until it is fully seated.
TOOLS:
Driver 07749-0010000
Bearing:driver attachment 07GAD-SD40101
PINION GEAR REMOVAL
Hold the gear case in a vise with soft jaws.
HOLDER PLATE
Hold the pinion joint and remove the pinion joint
nut using the special tools.
TOOLS:
Pinion holder plate
07924-ME40010
Collar set "C"
07924-ME40020
Remove the pinion joint.
Remove the bolt and retainer lock tab.
COLLAR
- - ~ ~ ~ - - - - - - - - - - - - - -
14-12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
----~