Carburetor Removal - Honda VT750C2 Shadow Spirit Service Manual

FUEL SYSTEM
INSTALLA"nON
Connect the crankcase breather hose to the air
cleaner housing.
Connect the connecting tube to the carburetor.
Tighten the air cleaner housing connecting tube
band screw securely.
Install the collars, air cleaner housing mounting
bolts, and tighten the mounting bolts securely.
Jnstall the throttle stop screw knob onto the air
"cleaner housing stay.
Install the fuel tank (page 3-4).
CARBURETOR
REMOVAL
Remove
the
following:
- FueltaAk(page.3-4)
- Air e1eanerhoiisIng (page 6-6)
Disconnect the PAIR control valve vacuum hose
from the?-wayjgint.
Disconnectthe TP sensor 3P connector.
Connect
t~edr~itlh,O.~eto
the float chamber.
L90~en!tt~;:Ql3i~ij~i;tordrainscrew
and drain the
gasolinetotheapproved gasoline container.
Retigfl;~en
the carburetor drain screw to the speci ­
fie<:!t~r.ql,le.
TORfiUE:1.5 N·m (0.2 kgf·m, 1.1 Ibf·ft)
Disconnect the drain hose.
Except california
Release the carburetor air vent hose from the
type:
clamp.
California type shown:
6-7