Case Bearing Replacement - Honda VT750C2 Shadow Spirit Service Manual

FINAL DRIVE
Select the replacement shim (page 14-10).
Install the shim, bearing and inner races onto the
pinion gear.
NOTE:
When the gear set, pinion bearing, ring gear bearing
and/or gear case has been replaced, use a 2.00 mm
(0.079 in) thickness shim for initial reference.
INNER RACES
PINION GEAR
BEARING
Drive the bearing with the marked side facing up.
TOOLS:
Driver, 40 mm 1.0. 07746-0030100
Attach"!lent, 25 mm 1.0.
07746-0030200
CASE BEARING REPLACEMENT
RING GEAR CASE BEARING
Be
sure
to
wear
Heat the gear case to 80°C (176°F) evenly using a
BEARING REMOVER WEIGHT
heavy gloves when
heat gun.
handling the heated
Remove the ring gear case bearing from the gear
gear case.
caseiJsing the special tools.
TOOLS:
Be~rigg
remover, 35 mm
07936-3710400
Remover handle 07936-3710100
Remo""r weight
07741-0010201 or
07936-371020A or
07936-3710200
(U.S.A. only)
Remove the oil seal.
BEARING
14-14