...................--.....- - -
CLUTCH/GEARSHIFT UNKAGE
OIL PUMP DRIVEN SPROCKET
Check the oil pump driven sprocket for wear or
damage.
PRIMARY DRIVE GEAR
REMOVAL
Remove the clutch (page 11-7).
Remove the ignition pulse generator mounting
bolts.
Remove the ignition pulse generator and grom
mets.
Temporarily install-the clutch outer guide, oil pump
r-'----
drive sprocket and clutch outer onto the mainshaft
(page 11-18).
Hold the primary drive gear using a special tool and
remove the primary drive gear bolt and washer.
TOOL:
Gear holder,
2.5
07724-0010100 or
07724-001 A 100
(U.S.A.
only)
Remove the gear holder and temporarily installed
parts.
Remove the ignition pulse generator rotor and pri
mary drive gear..
11-12