Rear Brake - Honda VT750C2 Shadow Spirit Service Manual

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
REAR WHEEL/BRAKE/SUSPENSION
With the rear brake applied, pump the swingarm up
and down several times to seat the axle.
Tighten the pinch bolt to the specified torque.
TORQUE: 27 N·m (2.8 kgf'm, 20 Ibf·ft)
Connect the stopper arm to the brake panel with
bolt, rubber washer, washer and nut.
Tighten the nut to the specified torque.
TORQUE: 22N·m (2.2 kgf·m, 16Ibf·ft)
Inst~1I
a new cotter pin.
Installthe spring, joint pin and adjusting nut.
Install the exhaust system (page 3-11).
Adjust the brake pedal freeplay (page 4-21 ).
REAR BRAKE
R.EMOVAL
Remove the rear wheel (page 16-6).
Remove the brake panel from the rear wheel
(page 16-8).
INSPECTION
Measure the brake drum I.D.
SERVICE LIMIT: 181 mm (7.1 in)
16-l4