Installing The Front Brake Discs; Installing The Front Wheel Hubs; Installing The Front Wheels - Yamaha Grizzly550 User Manual

1
EAS28P1009

INSTALLING THE FRONT BRAKE DISCS

The following procedure applies to both of the
front brake discs.
1. Install:
• Brake disc
Brake disc bolt
30 Nm (3.0 m·kg, 22 ft·lb)
LOCTITE®
TIP
Install the brake disc so that the recessed por-
tion of the bolt hole faces away from the hub.
EAS28P1010

INSTALLING THE FRONT WHEEL HUBS

The following procedure applies to both of the
front wheel hubs.
1. Install:
• Wheel axle nut New
Wheel axle nut
260 Nm (26.0 m·kg, 190 ft·lb)
TIP
• Do not apply oil to the threads of the nut.
• After tightening the nut, stake the collar of the
nut into the notch of the shaft.
2
4-16
FRONT WHEELS
2. Check:
• Brake disc
Refer to "CHECKING THE FRONT BRAKE
DISCS" on page 4-26
EAS28P1011

INSTALLING THE FRONT WHEELS

The following procedure applies to both of the
front wheels.
1. Install:
• Wheel
TIP
The arrow mark "1" on the tire must point in the
direction of wheel rotation.
2. Tighten:
• Wheel nuts "1"
Wheel nut
55 Nm (5.5 m·kg, 40 ft·lb)
EWA28P1007
WARNING
Tapered wheel nuts "1" are used for both the
front and rear wheels. Install each nut with
its tapered side towards the wheel.
techsparkstudio.com