Advertisement
4. DUMP Selection
(1) When DUMP is selected, the following message will appear.
[HDD&FLOPPY DISK DATA DUMP]
format type select (O:2DD.l:2D,2:2HD,3:HDD) ?
(2) Select a format type number. Type the number. If 3 is
selected, the dump lists for the hard disk are displayed
automatically.
0: Display a dump list for a floppy disk (2DD)
1: Display a dump list for a floppy disk (2D).
2: Display a dump list for a floppy disk (2HD).
3: Displays a dump list for a hard disk.
(3) If 0, 1, or 2 is selected, the following message will
appear.
Select FDD number (1:A/2:B) ?
(4) Select an FDD drive
number~
the following message will
then appear.
Insert source disk into drive A :
Press any key when ready.
(5) Remove the diagnostics disk from the FDD and insert a
source
disk~
press any key. The Track Dumber ?? message
will then appear. Type the track number and press Enter.
(6) The Bead Daaber ? message will then appear. Type the head
number and press Enter.
(7) The Sector Daaber ?? message will then appear. Type the
sector number and press Enter.
The dump list for
the
floppy disk will be displayed.
(8) After a dump list appears on the screen, the Press Daaber
key (1:up,2:da.n,3:eDd) ? message will appear.
1. Displays the next sector dump.
2. Displays a previous sector dump.
3. Displays the following message.
Another dump (1:Yes/2:No) ?
(9) If you type 1 the display will return to the message
shown after (4) above.
If you type 2 the display will
return to the DIAGNOSTICS MENU.
3-41
Advertisement
