1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite T130D
  6. User manual

Toshiba Satellite T130D User Manual

Portable personal computer
Hide thumbs Also See for Satellite T130D:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual
TOSHIBA
Satellite T130D/T110D
Satellite Pro T130D/T110D
PORTEGE T130D/T110D
Portable Personal Computer
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite T130D

Summary of Contents for Toshiba Satellite T130D

  • Page 1 TOSHIBA Satellite T130D/T110D Satellite Pro T130D/T110D PORTEGE T130D/T110D Portable Personal Computer User's Manual...
  • Page 2 Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Safety Instructions

    Incorporated in the United States and/or other countries. Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. ConfigFree is a trademark of TOSHIBA Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

  • Page 4: When Using Your Computer

    When Using Your Computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base. Allowing sustained contact with the skin could cause discomfort or, eventually, a burn.

  • Page 5: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's external monitor port, USB port, serial port, parallel port, PS/2 mouse/keyboard port and microphone jack.
  • Page 6 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary "The product complies with the requirements of Information: the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or the R&TTE Directive 1999/5/EC." This product is carrying the CE-Mark in accordance with the related European Directives.
  • Page 7 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http:// eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators...
  • Page 8 Compliant. If the model you purchased is compliant, it is labeled with the ENERGY STAR logo on the computer and the following information applies. TOSHIBA. is a partner in the Environmental Protection Agency's (EPA) ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.

  • Page 9: Important Notice

    Dispose of used batteries according to the manufacturer's instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual...

  • Page 10: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 11 Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.

  • Page 12: Instruction Manual For Safety And Comfort

    Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. Mobile phones Please be aware that the use of mobile phones can interfere with the audio system.

  • Page 13: Table Of Contents

    Special features ......... . 1-9 TOSHIBA Value Added Package ......1-11 Utilities and Applications.
  • Page 14 TOSHIBA Disc Creator........4-7...
  • Page 15 Using the Hard Disk Drive (HDD) Protection ....4-15 TOSHIBA HDD Protection Properties..... . . 4-16 Details .
  • Page 16 TOSHIBA support........

  • Page 17: Display Controller

    Appendix E Starting the TOSHIBA PC Health Monitor..... . E-2 If a TOSHIBA PC Health Monitor message is displayed ..E-2...

  • Page 18: Preface

    This manual tells you how to set up and begin using your TOSHIBA Satellite T130D/T110D, Satellite Pro T130D/T110D, PORTEGE T130D/ T110D Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 19: Conventions

    Preface Chapter 4, Operating Basics, includes instructions on using the following devices: Touch Pad, Sound System, wireless communication and LAN. It also provides tips on care of the computer, and CD/DVDs. Chapter 5, Keyboard, describes special keyboard functions including the keypad overlay and hot keys. Chapter 6, Power and Power-Up Modes, gives details on the computer's...

  • Page 20: Key Operation

    Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, CTRL + C means you must hold down CTRL and at the same time press C.

  • Page 21: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.

  • Page 22: Software

    Online Manual (This manual) Other software may be preinstalled dependant on the model purchased. Documentation ■ Satellite T130D/T110D, Satellite Pro T130D/T110D, PORTEGE T130D/T110D Series Personal Computer User Information Guide ■ Instruction Manual for Safety and Comfort If any of the items are missing or damaged, contact your dealer immediately.

  • Page 23: Features

    Processor Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All Programs TOSHIBA Utilities PC Diagnostic Tool.
  • Page 24 Introduction Main Memory Part of the main system memory may be used by Disclaimer the graphics system for graphics performance and therefore reduce the amount of main system memory available for other computing activities. The amount of main system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
  • Page 25 Introduction Disks Hard disk Disclaimer 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.

  • Page 26: Pointing Device

    Introduction Graphics Controller Graphics controller maximizes display performance. Refer to Display Controller section in Appendix B, Display Controller for more information. Legal Footnote (Graphics Processor Unit ("GPU")) For more information regarding the Graphics Processor Unit ("GPU"), please refer to the Legal Footnotes section in Appendix F or click the *7 above.
  • Page 27 Introduction Slots Bridge Media Slot This slot lets you insert an SD™/SDHC™ memory card, Memory Stick™(PRO™/PRO Duo™ ), xD-Picture Card™, and MultiMediaCard™. Multimedia Web Camera Record/Send still or video images with this integrated Web Camera. Sound System The integrated sound system provides support for the computer's internal speakers and microphone, as allowing an external microphone and headphones to be connected via the...
  • Page 28 Introduction ■ The transmission speed over the wireless LAN, and the distance over which the wireless LAN can reach, may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, client design and software/hardware configurations. The transmission rate described is the theoretical maximum speed as specified under the appropriate standard - the actual transmission speed will be lower than the theoretical maximum speed.

  • Page 29: Special Features

    Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
  • Page 30 Chapter 4, Operating Basics, for more details. The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. Hibernation Mode This feature lets you turn off the power without exiting from your software. The contents of main...

  • Page 31: Toshiba Value Added Package

    Introduction TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the Saver features of more various power supply managements. TOSHIBA Zooming This utility allows you to enlarge or reduce the...

  • Page 32: Utilities And Applications

    , select All Programs, TOSHIBA, CD&DVD Applications, and then click Disc Creator. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.
  • Page 33 ■ Lock Computer: Lock your computer without turning it off. This has the same function as Lock of the Start menu. ■ TOSHIBA Assist: Open the TOSHIBA Assist if it is already installed in your computer. User’s Manual 1-13...

  • Page 34: Options

    * The availability of memory depends on the model you purchased. Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. AC Adaptor If you use your computer at more than one site...

  • Page 35: Chapter 2 The Grand Tour

    1. DC IN LED 5. Bridge media slot LED 2. Power LED 6. Wireless communication LED 3. Battery LED 7. Wireless WAN LED 4. Disk LED Front of the computer with display closed (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) User’s Manual...
  • Page 36 The Grand Tour 1 2 3 4 6 7 8 1. DC IN LED 6. Wireless communication LED 2. Power LED 7. Wireless WAN LED 3. Battery LED 8. Arrow Lock 4. Disk LED 9. Numeric Lock 5. Bridge media slot LED Front of the computer with display closed (Satellite T110D, Satellite Pro T110D, PORTEGE T110D) DC IN LED...

  • Page 37: Left Side

    4. HDMI out port 2. External Monitor Port 5. Universal Serial Bus (USB 2.0) port 3. Cooling Vents The left side of the computer (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) 1. Security Lock 4. Bridge Media Slot 2. External Monitor Port 5.
  • Page 38 The Grand Tour External Monitor This 15-pin port lets you connect an external Port video display. Cooling Vents Cooling vents help prevent the CPU from overheating. Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

  • Page 39: Right Side

    2. Headphone Jack 5. LAN Jack 3. Microphone Jack 6. DC IN 19V Jack The right side of the computer (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) 1. Headphone Jack 4. LAN Jack 2. Microphone Jack 5. DC IN 19V Jack 3.
  • Page 40 The Grand Tour Headphone Jack A 3.5 mm mini headphone jack enables connection of stereo headphones. Microphone Jack A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for monaural microphone input. Universal Serial Bus Two Universal Serial Bus ports are on the right (USB 2.0) ports side.

  • Page 41: Backside

    The Grand Tour Backside The following figure shows the computer's back panel. The backside of the computer (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) The backside of the computer (Satellite T110D, Satellite Pro T110D, PORTEGE T110D) Underside The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage.
  • Page 42 The Grand Tour 1. Memory Module Cover 4. Battery Release Latch 2. Battery Lock 5. Speakers 3. Battery Pack The underside of the computer (Satellite T110D, Satellite Pro T110D, PORTEGE T110D) Memory Module This cover protects two memory module sockets -- Cover one or two modules are pre-installed.

  • Page 43: Front With The Display Open

    3. Web Camera Lens 8. Wireless LAN/Wireless WAN Antennas (Not shown) 4. Built-in microphone 9. LCD Sensor switch (Not Shown) 5. Power Button The front of the computer with the display open (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) User’s Manual...

  • Page 44: Display Screen

    The Grand Tour 1. Display Screen 6. Touch Pad 2. Web Camera LED 7. Touch Pad control Buttons 3. Web Camera Lens 8. Wireless LAN/Wireless WAN Antennas (Not shown) 4. Built-in microphone 9. LCD Sensor switch (Not Shown) 5. Power Button The front of the computer with the display open (Satellite T110D, Satellite Pro T110D, PORTEGE T110D) Display Screen...
  • Page 45 The Grand Tour Power Button Press this button to turn the computer's power on and off. LCD Sensor switch This switch senses when the display panel is either closed or opened and activates the Panel Power Off/On feature as appropriate. For example, when you close the display panel the computer enters Hibernation Mode and shuts itself down and then, when you next open the...

  • Page 46: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 47: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read the Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability. ■...

  • Page 48: Connecting The Ac Adaptor

    ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 49 Getting Started 1. Connect the power cord to the AC adaptor. Connecting the power cord to the AC adaptor Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. 2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the right side of the computer.

  • Page 50: Opening The Display

    Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. 1. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

  • Page 51: Turning On The Power

    Getting Started ■ When opening the panel, please be careful not to force it beyond the point where it moves easily. ■ Be careful not to open the display panel too far as this could put stress on the display panel's hinges and cause damage. ■...
  • Page 52 Getting Started Turning on the power ® Windows 7 setup ® The Windows 7 Startup Screen will be the first screen displayed when you turn on the power. Follow the on-screen instructions on each screen in order to properly install the operating system. When it is displayed, be sure to read the Software License Terms carefully.

  • Page 53: Turning Off The Power

    Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system's main screen.
  • Page 54 Getting Started ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options. ■ To restore operation from Sleep Mode, press the power button or press any key. The latter action works only if Wake-up on Keyboard is enabled in HW Setup.

  • Page 55: Hibernation Mode

    Getting Started ■ When the computer is shut down in Sleep Mode, the power indicator flashes Amber. ■ If you are operating the computer on battery power, you can lengthen the operating time by turning it off into Hibernation Mode, as Sleep Mode consumes more power.

  • Page 56: Restarting The Computer

    Getting Started Automatic Hibernation Mode The computer will enter Hibernation mode automatically when you press the power button or close the Display Screen. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open System and Security and open Power Options. 3.

  • Page 57: System Recovery Options

    Getting Started System Recovery Options A hidden partition is allocated on the hard drive for the System Recovery Options. The System Recovery Options feature will be unusable if this partition is deleted. System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory.

  • Page 58: Create Optical Recovery Media

    5. Double Click the Recovery Media Creator icon on the Windows desktop, or select the application from Start menu. 6. After TOSHIBA Recovery Media Creator starts, select the type of media and the title you wish to copy to the media then click the Create button.

  • Page 59: Restoring The Preinstalled Software From The Recovery Hdd

    1. Turn off your computer. 2. Hold down the 0 (zero) key on the keyboard and turn on your computer. When "TOSHIBA Leading Innovation >>>" appears, release the 0 (zero) key on the keyboard. 3. A menu appears. Follow the on-screen instructions.

  • Page 60: Restoring The Preinstalled Software From Recovery Media

    1. Load the Recovery Media in the optional optical media drive and turn off the computer's power. 2. Hold down the F12 key and turn on the power. When "TOSHIBA Leading Innovation >>>" appears, release the F12 key. 3. Use the upper or lower cursor key to select the CD/DVD in the display menu.

  • Page 61: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 62: Using The Web Camera

    Operating Basics Do not press on the Touch Pad too hard or press a sharp object such as a ball point pen against the Touch Pad. The Touch Pad could be damaged. For some functions, you can tap the Touch Pad instead of pressing a control button.

  • Page 63: Using The Software

    Operating Basics Using the software TOSHIBA Web Camera Application is pre-configured to start when you turn ® on Windows 7; if you need to restart it go to Start All Programs TOSHIBA Utilities Web Camera Application. 1. CAMERA RESOLUTION 4. VIDEO RECORDING 2.

  • Page 64: Using The Toshiba Face Recognition

    Operating Basics Using the TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier.

  • Page 65: How To Delete The Face Recognition Data

    To delete the Face Recognition Data, follow the steps as described below: 1. To launch this utility, click Start All Programs TOSHIBA Utilities Face Recognition. The Management screen is displayed. 2. Select a user which is deleted in the Management screen.

  • Page 66: How To Launch The Help File

    Utilities Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ 1:N Mode Login screen : If the face authentication tile is selected by default, you can log in without using the keyboard or mouse.

  • Page 67: Using The Microphone

    You cannot use the TOSHIBA Disc Creator "Audio CD" function to record music to the DVD-R/-RW or DVD+R/+RW media. ■ Do not use the "Disc Backup" function of TOSHIBA Disc Creator to copy ■ DVD-Video and DVD-ROM with copyright protection. DVD-RAM media cannot be backed up with the "Disc Backup"...

  • Page 68: Wireless Communications

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the Disc Backup function of TOSHIBA Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.

  • Page 69: Wireless Lan

    Operating Basics ■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi or Bluetooth operation. ■...

  • Page 70: Security

    TOSHIBA strongly recommend the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Bluetooth Stack for Windows by TOSHIBA...

  • Page 71: Wireless Activity Led

    Operating Basics Set the Wireless LAN function to off in airplanes and hospitals. Check the indicator. It will stop glowing when the wireless communication function is off. Wireless activity LED The wireless activity LED indicates the status of the wireless communication functions.

  • Page 72: Connecting Lan Cable

    Operating Basics Connecting LAN cable ■ Do not connect any other cable to the LAN jack except the LAN cable. Otherwise, malfunctions or damage may occur. ■ Do not connect any power supplying device to the LAN cable that is connected to the LAN jack.

  • Page 73: Starting The Usb Sleep And Charge Utility

    Starting the USB Sleep and Charge Utility To start the utility, click Start All Programs TOSHIBA Utilities USB Sleep and Charge. You can set mode1/mode3/mode4/disable USB sleep and charge function also in BIOS Setup menu.

  • Page 74: Power Supply Mode Settings

    Operating Basics Check the "USB Sleep and Charge" check box. In the default state this function is disabled. Power supply mode settings There are several USB Sleep and Charge function modes. "Mode 4(Default)" should normally be used. Set one of the other modes (try "Mode 3"...

  • Page 75: Moving The Computer

    This computer has a function for reducing the risk of damage on the hard disk drive. Using an acceleration sensor built into the computer, TOSHIBA HDD Protection detects vibration, falls and shocks, and similar signs of movement of the computer, and automatically moves the Hard Disk Drive head to a safe position to reduce the risk of damage that could be caused by head-to-disk contact.

  • Page 76: Toshiba Hdd Protection Properties

    The hard disk drive head is in a safe position. TOSHIBA HDD Protection is disabled. TOSHIBA HDD Protection Properties You can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window. To open the window, click Start All Programs...

  • Page 77: Details

    Intensely shaking the computer or other subjecting it to strong impacts may cause damage to the computer. Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.

  • Page 78: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/ 105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.

  • Page 79: F1 ... F12 Function Keys

    The Keyboard F1 ... F12 function keys The function keys (not to be confused with FN) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed.

  • Page 80: Hot Keys

    The Keyboard Press FN + F10 or FN + F11 to access the computer's integrated keypad. When activated, the keys with grey markings on their bottom edge become either numeric keypad keys (FN + F11) or cursor control keys (FN + F10). Please refer to the Keypad overlay section in this chapter for more...
  • Page 81 Number Lock: Enables or disables the Number Lock function. Scroll Lock: Enables or disables the Scroll Lock function. Zoom: Changes the display resolution. TOSHIBA Zooming Utility (reduce): Reduces the icon size on the desktop or the font size within one of the supported application windows. User’s Manual...

  • Page 82: Fn Sticky Key (Depends On The Model You Purchased)

    Volume up: Pressing FN + 4 to increase the volume in increment. FN Sticky key (Depends on the model you purchased) You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F number" key.

  • Page 83: Keypad Overlay

    The Keyboard Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the centre of the keyboard with gray letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 104/105-key enhanced keyboard described previously.

  • Page 84: Temporarily Using Normal Keyboard (Overlay On)

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold FN and press any other key. All keys will operate as if the overlay were off.

  • Page 85: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer's operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 86: Power Indicators

    Power and Power-Up Modes Table Power conditions Power on Power off (no operation) Universal Battery charge is • Operates above low battery • LED: Battery off trigger point adaptor Battery charge is • Operates connected below low battery • LED: Battery flashes amber trigger point Battery charge is Computer shuts down...

  • Page 87: Power Indicator

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode.

  • Page 88: Real Time Clock Battery

    The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
  • Page 89 Power and Power-Up Modes Press ENTER key. BIOS setup will terminate and the computer will be rebooted. After configuring the date and time it is recommended that you switch the computer on and then leave it in this state so that the Real Time Clock battery can be charged.

  • Page 90: Care And Use Of The Battery Pack

    Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.
  • Page 91 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 92: Charging The Batteries

    Power and Power-Up Modes 6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely, Sleep Mode will not function and data in memory will be lost. Also, the computer might register an incorrect time and date.

  • Page 93: Battery Charging Notice

    Power and Power-Up Modes Time Refer to User Information Guide about Charging time. The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices, for example, the battery might scarcely charge at all during operation.

  • Page 94: Monitoring Battery Capacity

    Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Windows Mobility Center window ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.

  • Page 95: Retaining Data With Power Off

    Power and Power-Up Modes Retaining data with power off Refer to User Information Guide about Retaining time. Extending battery life To maximize the life of your battery pack: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.

  • Page 96: Replacing The Battery Pack

    Power and Power-Up Modes Replacing the battery pack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and will need to be replaced when it reaches the end of its operating life.

  • Page 97: Removing The Battery Pack

    Power and Power-Up Modes Removing the battery pack To remove a discharged battery, follow the steps below. 1. Save your work. 2. Turn the computer's power off. Make sure the Power indicator is off. 3. Remove all cables connected to the computer. 4.

  • Page 98: Installing The Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 99: Power-Up Modes

    Power and Power-Up Modes Power-up modes The computer has the following power-up modes: ■ Boot Mode: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation Mode: Data in memory is saved to the hard disk. ■...

  • Page 100: Chapter 7 Hw Setup

    Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click , All Programs, TOSHIBA, Utilities, HWSetup.

  • Page 101: User Password

    HW Setup Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Not Registered Un-registers an existing password Registered Register a new password by following the on screen instructions Owner String This blank field is used to display a message when the password field is...
  • Page 102 HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep Mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep Mode. Enabled Enables the Wake-up on Keyboard function.
  • Page 103 HW Setup To access BIOS setup menu, press F2 when booting up the computer. User’s Manual...

  • Page 104: Chapter 8 Optional Devices

    Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ Secure Digital™ (SD) Card (SD memory card, SDHC memory card, miniSD Card, microSD Card) ■...

  • Page 105: Bridge Media Slot

    Optional Devices Bridge media slot The computer is equipped with a bridge media slot that can accommodate SD/SDHC/MMC/Memory Stick/Memory Stick Pro memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type Capacities up to 2GB...

  • Page 106: Installing A Memory Card

    1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) Inserting a memory card (Satellite T110D, Satellite Pro T110D, PORTEGE T110D) Be sure the memory card is oriented properly before you insert it.

  • Page 107: Removing A Memory Card

    3. Gently press the memory card inside the socket to eject it. 4. Grasp the card and remove it. Removing a memory card (Satellite T130D, Satellite Pro T130D, PORTEGE T130D) Removing a memory card (Satellite T110D, Satellite Pro T110D, PORTEGE T110D)

  • Page 108: Memory Card Care

    Optional Devices ■ Make sure the memory card indicator is out before you remove the card or turn off the computer's power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card.

  • Page 109: Memory Expansion

    RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.
  • Page 110 Optional Devices 1. Memory Module Cover Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 30 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer.

  • Page 111: Removing A Memory Module

    Optional Devices 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and Power- Modes. 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab. Removing a memory module To remove the memory module, make sure the computer is in boot mode then:...

  • Page 112: Additional Battery Pack

    Optional Devices Latches Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.

  • Page 113: External Monitor

    Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. Refer to Appendix B, Display Controller. The computer supports several video modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2.

  • Page 114: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 115: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 116: Hardware And System Checklist

    Troubleshooting Software The problems may be caused by your software or disc. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.

  • Page 117: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 118: Ac Power

    Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn't Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power outlet.

  • Page 119: Disposing Of Pc And Pc Batteries

    Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor and replace the battery. Make sure it is securely seated. Check the Battery indicator.

  • Page 120: Real Time Clock

    Troubleshooting ■ Reformatting the media ■ Reinstalling an operating system from the recovery media or HDD. The procedures above delete only the initial part of the data used for file management. This makes the file invisible to the operating system, but the data can still be read by specialized utilities.

  • Page 121: Lcd Panel

    Troubleshooting LCD panel Apparent LCD problems may be related to the computer's setup. Problem Procedure No display Press hot keys FN + F5 to change the display priority, to make sure it is not set for an external monitor. Problems above remain Refer to your software's documentation to unresolved or other determine if the software is causing the difficulty.

  • Page 122: Recovery Media

    "Restore Original Factory Image" from the drop-down menu. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.

  • Page 123: Usb Mouse

    Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. slow 1. To access this utility, click , Control Panel, Hardware and Sound, then Mouse. 2. Within the Mouse Properties window, click the Pointer Options tab.

  • Page 124: Usb

    Check the "USB Sleep and Charge" check box to enable this function in the TOSHIBA USB Sleep and Charge Utility. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.
  • Page 125 If this function can not be still used, uncheck the "USB Sleep and Charge" check box in the TOSHIBA USB Sleep and Charge Utility and stop using the function. The battery depletes If USB Sleep and Charge function is enabled, the...

  • Page 126: Memory Expansion

    Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below.

  • Page 127: Lan

    Troubleshooting Problem Procedure No display Try adjusting the contrast and brightness controls on the external monitor. Press hot keys FN + F5 to change the display priority and make sure it is not set for the internal display. Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly.

  • Page 128: Sd/Mulimedia Card

    Microsoft's Web site at www.microsoft.com/windows/ virtual-pc. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. User’s Manual 9-15...

  • Page 129: Before You Call

    They are your best sources for current information and support. Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe In Europe Australia Germany &...
  • Page 130 TOSHIBA Court Irvine, California 92618 Weybridge Business Park Addlestone Road Weybridge, Surrey KT15 2UL India The Rest of Europe TOSHIBA India Pvt Ltd. TOSHIBA Europe (I.E.) GmbH PC Division Geschäftsbereich, 6th Floor, DR Gopal Das Bhawan Deutschland-Österreich Barakhamba Road, Delhi-110001,...

  • Page 131: Specifications

    Appendix A Specifications This appendix summarizes the computer's technical specifications. Physical Dimensions Refer to User Information Guide about Size. Environmental Requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Thermal gradient 15°C per hour 20°C per hour maximum maximum Relative humidity 20% to 80%...

  • Page 132: Appendix B Display Controller

    Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. A high-resolution external monitor connected to the computer can display up to 1920 horizontal and 1200 vertical pixels at 16 M colors. (Depends on the model you purchased.) The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of...

  • Page 133: Appendix C Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card ■ IEEE 802.11 Standard (Revision b g and n) for Compatibility Wireless LANs ■...

  • Page 134: Radio Characteristics

    Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
  • Page 135 Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.

  • Page 136: Ac Power Cord And Connectors

    Appendix D AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 137 AC Power Cord and Connectors In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

  • Page 138: Toshiba Pc Health Monitor

    ■ Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD.

  • Page 139: Starting The Toshiba Pc Health Monitor

    TOSHIBA PC Health Monitor Toshiba's obligations under its standard limited warranty in any way. Toshiba's standard limited warranty terms and limitations apply. Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started using the following methods: ■ Click Start...
  • Page 140 Appendix F Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.
  • Page 141 86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your computer documentation or visit the TOSHIBA website at http://www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration.
  • Page 142 Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 143: Copy Protection

    Legal Footnotes Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.
  • Page 144 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Technology ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 145 Glossary HDMI-CEC: high definition multimedia interface consumer electronics control IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers IMSM: Intel Matrix Storage Manager I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card...
  • Page 146 Glossary alphanumeric: Keyboard characters including letters, numbers and other symbols, such as punctuation marks or mathematical symbols. alternating current (AC): Electric current that reverses its direction of flow at regular intervals. analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted.
  • Page 147 Glossary cache memory: A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer's main memory. See also L1 cache, L2 cache. capacity: The amount of data that can be stored on a magnetic storage device such as a floppy diskette or hard disk drive.
  • Page 148 Glossary computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information. configuration: The specific components in your system (such as the terminal, printer, and disk drives) and the settings that define how your system works.
  • Page 149 Glossary documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions. double click: To press and release the pointing device's primary button ®...
  • Page 150 The computer's feature in which certain keys in combination with the extended function key, FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. User’s Manual...
  • Page 151 Glossary icon: A small graphic image displayed on the screen or in the indicator panel. In Windows, an icon represents an object that the user can manipulate. i.LINK (IEEE1394): This port enables high-speed data transfer directly from external devices such as digital video cameras. input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices.
  • Page 152 Glossary Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing-side coating is etched into character forming segments with leads that extend to the edge of the glass. Applying a voltage between the glass sheets.
  • Page 153 Glossary OCR: Optical Character Recognition (reader). A technique or device that uses laser or visible light to identify characters and input them into a storage device. online state: A functional state of a peripheral device when it is ready to receive or transmit data.
  • Page 154 Glossary Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result. See also application. prompt: A message the computer provides indicating it is ready for or requires information or an action from you.
  • Page 155 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 156 Glossary window: A portion of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft Windows window. Wireless LAN: Local Area Network (LAN) through wireless communication. Wireless WAN: Wide Area Network (WAN) through wireless communication.
  • Page 157 Index Display controller, B-1 AC adaptor, 1-4 additional, 1-14 Equipment checklist, 1-1 connecting, 3-2 External monitor, 8-10 Additional AC adaptor, 8-9 Additional battery pack, 8-9 ASCII characters, 5-7 Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-3 Fn + F2 (power save mode), Battery charging, 6-8...
  • Page 158 LAN, 1-7, 4-11 Power, 9-4 cable types, 4-11 Real Time Clock, 9-7 connecting, 4-12 Self test, 9-4 disconnecting, 4-12 Sound system, 9-13 Support from TOSHIBA, Memory, 1-3 9-15 expansion, 1-14, 8-6 System start-up, 9-3 installing, 8-6 USB, 9-11 removing, 8-8...
  • Page 159 5-2 ScrLock, 5-3 Sound System, 1-7 headphone jack, 1-7 microphone jack, 1-7 mute hot keys, 5-3 TOSHIBA ConfigFree, 1-12 TOSHIBA Disc Creator, 1-12 Touch Pad, 1-6 using, 4-1 USB, 1-6 Video modes, B-1 Video RAM, 1-4 Wireless communication switch, 4-10...

This manual is also suitable for:

Portege t110dSatellite t110dSatellite pro t110dPortege t130d

Table of Contents