4.
Insert the long end of the hinge cover cable shield into the
LCD cover (E).
5.
Insert the short end of the LCD cover cable shield into the
main unit.
The cable should be sandwiched between the two
shields (F).
6.
While feeding the long end of the hinge cover cable
~hi~ld
into the LCD cover, seat the LCD cover subassembly under the
two dowel ends (G).
FIGURE 4-30 Seating the LCD Cover
7.
Rotate the LCD cover assembly to a vertical position while
constantly maintaining pressure to prevent separtion of the
hinge cover and the LCD cover.
Insert and tighten down the
two LCD cover screws to complete the replacement procedure.
8.
As directed in part 4.16, reassemble the LCD cover.
4-25