Advertisement
PROCBDURB 1
Display Check
1.
Turn the POWER switch off.
2.
After
turning
the
POWER
switch
on
again,
the
following
message should appear in the upper left-hand corner of the
screen:
IIBIIORY TEST
IllkS
3.
If the message appears, go to PROCEDURE 3.
4.
If the message does not appear, first do the following:
Ca) Confirm that tpe contrast knob is adjusted correctly.
Cb)
Confirm that the display is not on an external CRT.
(The CRT indicator lamp will be lit if the display is
on an external CRT.)
After confirming (a) and (b) above, perform steps I and 2
again. If the message still fails to appear, go to PROCEDURE
2.
2-37
Advertisement
