4.3 DISC(BNBC'lIRG !'lIB TOP COVBR ASSBllBLY
1.
Confirm that the POWER switch is off.
2.
Remove the top cover assembly as directed in part 4.2.
3.
Lift the keyboard unit (A) out and place it in front of the
unit.
4.
Disconnect the LCD cable ( B) from the system PCB (C) •
(A)
FIGURE 4-7 Disconnecting the Top Cover Assembly
5.
To
install
a
new
top
cover
assembly,
follow
the
above
procedures in reverse.
4-5