Advertisement
4.12 RBIIOVIRG/RBPLACIRG 'rIIB BARD DISK DRIVE
CAurION: The hard disk contents will remain in the old
hard disk.
If desired, transfer the contents of the
old hard disk onto a floppy disk before replacing the
hard disk.
This can be done with the MS-DOS BACRUP
command.
(See the MS-DOS manual for details.>
1.
Confirm that the POWER switch is off.
2.
Turn the un it ups
i
de down and remove the seven screws
(A)
and three flatheaded countersunk screws
(B)
from the base
subassembly.
(A)
FIGURE 4-18 Removing the Screws from the Base Subassembly
4-16
Advertisement
