PROCBDORB 6
New FOO Connection
1.
Turn the POWER switch off.
2.
Remove the FOO. (Refer to part 4.10.>
3.
Connect
the
new
FOO
to
the
FOO
connector,
then
other
connectors too.
4.
Turn the POWER switch on.
5.
If normal operation is restored after connect the new FOO,
the previous FOO was defective. Assemble the system.
6.
If normal operation is not restored, system PCB is probably
defective. Refer to part 2.4.
2-22