2.6
lIARD DISK DRIVB ISOLA'IIOR PROCBDURBS
This section describes how to determine whether the Hard Disk
Drive is defective or not.
The procedures below are outlined in
the following pages.
They should be performed in the order
indicated.
PROCEDURE
1:
HDD Indicator Check
PROCEDURE
2:
Format Execution
PROCEDURE 3: Hard Disk Test Execution
PROCEDURE 4: Connector Check
PROCEDURE 5: Jumper Strap Check
PROCEDURE 6: New HDD Connection
Rote: Make sure that the HDD switch is on.
2-23