Advertisement
PROCBDURB 1
Message Check
1.
If the following message is displayed on
the screen,
the
system PCB is normal.
Place system disk in drive
Press any key when ready ••••
2.
If the above message is not displayed, check to see if any
of the following messages are displayed.
TABLE 2-2 Error Messages
KEYBOARD ERROR
FDD ERROR
OPTION ERROR
RTC ERROR
DISK 0 FAILURE
DISK CONTROLLER FAILURE
3.
If any of the above messages are displayed, go to PROCEDURE
3.
4.
If none of the above messages are displayed, go to PROCEDURE
2.
2-11
Advertisement
