Advertisement
3. COpy Selection
(1) When COPY is selected, the following message will appear.
DIAGNOSTICS - COpy
Type select (1:2D-04D.2:2D-08DE.3:2HD-08DE.4:2DD-2DD) ?_
(2) Select a media/drive type number.
Type the number.
The
following message will then appear.
Insert source disk into drive A :
Press any key when ready.
(3) Remove the diagnostics disk from the FDD and insert the
source
disk~
press any key. The Copy started message will
then
appear.
After
that,
the
following
message
will
appear.
Insert target disk into drive A
Press any key when ready.
(4) Remove the source disk from the FDD and insert the work
disk
(formatted)~
press any key. When coping can not be
done with one operation, message (2) is displayed again.
Repeat
the operation.
After
the
floppy disk has
been
copied, the following message will appear.
Copy cOIIplete
Another copy (1:Yes/2:No) ?
(5) If you type 1 the display will return to the message in
(1) above. If you type 2 the display will return to the
DIAGNOSTICS MENU.
3-40
Advertisement
