Advertisement
3.18.2 Operations
1.
After pressing 5 and Enter to select from the DIAGNOSTICS
MENU,
the error
information
logged
in
the RAM or on the
floppy disk is displayed as shown below.
XXXXX ERRORS
CNT TEST NAME PASS STS AOOR WO RO
ERROR STATUS NAME
001
001
FOO 02
FOO 01
0000 103 00001 00 00 FOO - WRITE PROTECTED
0000 180 00001 00 00 FOO - TIME OUT ERROR
1
Adj..
1
Read data
Error status
Pass count
Write data
Error status name
Sub test number
Test name
Error count
[[1:Next,2:Prev,3:Ex1t,4:Clear,5:Pr1nt,6:FO LogRead,7:FO LogWr1te ]]
2.
Error
information
to
be
displayed
on
the
screen
can
be
manupulated with the following key operation.
The 1 key scrolls the display to the next page.
The 2 key scrolls the display to the previous page.
The 3 key returns the display to the DIAGNOSTIC MENU.
The 4 key erases all error log information in RAM.
The 5 key outputs error log information to a printer.
The 6 key reads log information from a floppy disk.
The 7 key writes log information to a floppy disk.
3-36
Advertisement
