Safety Instructions - Furuno NAVnet 3D MFDBB Installation Manual

SAFETY INSTRUCTIONS

The user and installer must read the appropriate safety instructions before attempting to install
or operate the equipment.
WARNING
CAUTION
Warning, Caution
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment unless
totally familiar with electrical circuits.
Only qualified personnel should work
inside the equipment.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Be sure that the power supply is
compatible with the voltage rating of the
equipment.
Connection of an incorrect power supply
can cause fire or damage the equipment.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Prohibitive Action
Use the proper fuse.
Use of an incorrect fuse may damage the equipment.
Observe the following compass safe distances
to prevent interference to a magnetic compass:
i
Mandatory Action
CAUTION
Ground the equipment to prevent
electrical shock and mutual interference.
Standard
compass
MPU-001 1.45 m
MCU-001 0.55 m
DCU12 0.70 m
Steering
compass
0.90 m
0.40 m
0.45 m