The Title Manager
The next step in setting up your DMX-R100 for initial usage is to save the current settings as a Title. The DMX-
R100 can store up to ten Titles in its Flash Memory (up to a total of 4 megabytes); each Title is a collection of
system settings (including the SYNC/TIME CODE Window parameters), as well as Snapshots (up to 99 per
Title) and mix automation and cue list data. No one Title can exceed 2 megabytes in size, and, as an example, 99
Snapshots occupy approximately 800 k of memory; typical automated mixes occupy approximately 1 megabyte.
Titles are saved and loaded in the Title Manager Window.
IMPORTANT NOTE: The currently selected Title is automatically reloaded whenever the DMX-R100 is
powered on or rebooted, so be sure to always save your work in a Title before powering down.
Saving A Title To Flash Memory
1
Press the SYSTEM tab in the touchscreen. From the pop-up menu select TITLE MANAGER; the win-
dow appears. (See Figure 6)
Figure 6
Chapter 1 Getting Started
1-5