Sony DMX-R100 Quick Reference page 59

Cue List Operation
2
Go to the Sync/Time Code window (under the SYSTEM tab) and set TIME CODE READER Source to
TIME CODE IN. (See Figure 5)
3
In the CUE window, set TC LINK for Cues 2, 3, and 4 to ON, then highlight the TIME CODE value
for CUE 3. Using the ten-keypad of the DMX-R100, enter a SMPTE time code value of 01:00:05:00 for
CUE 3 (be sure to hit the Enter key on the keypad to complete the input). Then repeat the operation for
CUE 4, this time entering a SMPTE time code value of 01:00:10:00. (See Figure 6)
Figure 5
Figure 6
Tutorial 2 Mixing Session (Non-Automated Mixing)
T2-7