Sony DMX-R100 Quick Reference page 79

Second Pass: Cuts
9
To test that all cuts have been written, rewind your multitrack to the start of the song and begin playback.
As long as the ABS button is lit (and the upper center box in the touchscreen is red), all the cuts you
entered should occur at the corresponding SMPTE timecode points.
10
If you are dissatisfied with your pass, simply press the A button in the TC Automation section and recopy
the data back to the B buffer as described in steps 1 and 2 above. By following this procedure, you can
continue running a new pass (without losing the data in the original first pass) as many times as are
required until you are completely satisfied.
11
Go to the Title Manager window and press the SAVE button in order to save the updated "Tutorial 3"
Title to Flash Memory. This saves the mix in the currently selected "B" buffer (containing basic fader lev-
els and cuts). At this point, it's a good idea to do a save to floppy disk as well, since all succeeding passes
will be altering the data in one or both buffers.
Tutorial 3 Automated Mixing Session
T3-13